The recovered extracting agent could be reused for further three washing cycles. The results demonstrated that soil washing followed by PE/PS process could be a cost-effective remediation technology for heavy metal and organic co-contaminated soil.This study investigated the single and competitive adsorption characteristics of micropollutants using the pristine and alkali-modified spent coffee grounds (SCG) biochars. The alkali modification substantially improved the physicochemical characteristics of the SCG biochars (specific surface area and pore volume), which may have led to differences in the adsorption behaviors of the micropollutants. The pseudo second order model (R2 ? 0.990) better described the single and competitive adsorption kinetics than the pseudo first order model (R2 ? 0.664). It is evident that chemisorption played a key role in the removal of the micropollutants by the pristine and alkali-modified SCG biochars. The single and competitive adsorptions of the micropollutants were highly dependent on the solution pH and ionic strength since the pore-filling effects, electrostatic and hydrophobic interactions governed their removal by the pristine and alkali-modified SCG biochars. The higher removal efficiencies of the micropollutants by the alkali-modified SCG biochars (? 44.5%) in the presence of dissolved organic matter compared to the pristine SCG biochars (? 18.5%) support the assumption that alkali modification could markedly reinforce the surface structural properties of the SCG biochars related to the adsorption capacities.In-situ chemical oxidation (ISCO) requires an injection of oxidants into a contaminated site. However, the oxidants decompose and react with contaminants during transport to the contaminated region, which causes oxidant over-consumption. In-situ oxidant generation can solve this problem, and electrochemical methods can be applied to achieve this. Electrochemical oxidation is highly dependent on electrode material type. In this study, we evaluated graphite and carbon fiber as candidates for electrochemical oxidant generation and phenol as the model compound. The carbon fiber anode oxidized the phenol more effectively than graphite, with removal proportional to the applied current. Carbonate electrolytes were more effective at oxidizing phenols than sulfate electrolytes. The faster carbon fiber anode phenol oxidation is due to its large surface area. Carbonate radicals in the carbonate electrolyte contribute to phenol oxidation as well as further intermediate oxidation. The carbon fiber cathode was not an effective phenol oxidizer even though it generated more hydrogen peroxide. This is because there was no catalyst to transform the hydrogen peroxide into hydroxyl radicals. Results indicate that electrochemical oxidation using carbon fiber is an effective method for treating phenol found in groundwater with high concentrations of (bi)carbonate.Flue gas desulphurization gypsum (FGD) is a major solid waste in coal-fired energy plants, and the appropriate reuse of this resources is still a major challenge. In this study, the feasibility of FGD as a calcium source to produce hydroxyapatite (FGD-HAP) for the immobilization of lead (Pb) and cadmium (Cd) in spiked soil was investigated. The effects of FGD and FGD-HAP on soil properties and redistribution, bioaccessibility and plant uptake of Pb and Cd were examined. Results showed that application of FGD and FGD-HAP could significantly improve the enzymes activities of contaminated soils, but the effectiveness was more pronounced with FGD-HAP. Addition of only 1% FGD-HAP could effectively reduce bioavailable Pb and Cd concentration in soil as measured by CaCl2 extraction by 60.6% and 65.4%, respectively. On the other hand, plant available Pb and Cd could significantly decrease by 93.8% and 73.2% after amendment of 5% FGD-HAP. Significant changes in the micro-scale distribution of heavy metals before and after FGD-HAP treatment demonstrated that while heavy metals were predominantly associated with iron/manganese oxides in untreated soil, high correlation between heavy metals and phosphorus/sulfur was observed in FGD-HAP treated soil. In addition, results of the leaching tests showed that incorporation of FGD-HAP enhanced the retention capacity of heavy metals in soil, indicating that application of FGD-HAP could diminish the environmental risk of leachable heavy metals to groundwater. Overall, this study highlighted the potential value of FGD-HAP as a low-cost and high-efficient amendment for remediation of Pb and Cd contaminated soils.Pollution with pesticides is a widespread global problem and biomonitoring of the environment and human populations is necessary to assess potential harmful biological effects. One of the pesticides that are showing up in vegetables and fruit is chlorpyrifos (CPS). CPS is a nerve-poisoning organophosphorus insecticide, which is in up to 1/3 of all conventionally produced citrus fruits. https://www.selleckchem.com/products/guanosine.html Our review shows that CPS is a hazardous material that poses risks to human health and also pollutes the environment. There is numerous risk assessment of CPS reported, however, the assessment is easily affected by factors such as climate change, exposure period and CPS concentration. Therefore, rigorous update of the hazardous level of CPS is needed to determine the threshold level safe for humans and animals. There is a need for remediation using for example photoreactive nanoparticle methods and microbial degeneration possessing high degradation efficiency (73-97%). In addition, stringent biomonitoring of food, environment and human exposure should occur to avoid exposure to chemicals via citrus fruits and vegetables. This is necessary to assess health risks and socioeconomic impacts which also require collaboration between private and public sectors to facilitate the growth, sale and manufacturing of biopesticides.Coral reefs of the Persian Gulf are vulnerable to the potentially toxic metals (PTMs) accumulated in the ambient sediments. Nonetheless, few studies have investigated the PTMs pollution and risk in the hotspot coral ecosystems of the Persian Gulf at a large-scale. Hereupon, this study focused on the PTMs contamination, their potential ecological risks, historical depositions, geochemical controls and the plausible pollution sources in the core sediments (0-40?cm) collected from the ten coral ecosystems of the Persian Gulf, Iran. Both total and fraction analysis indicated considerable metal pollution levels. Contamination was steadily decreasing towards the bottom of the sediment core, revealing the impact of a recent anthropogenic input. High metal association with the exchangeable and other mobile fractions was observed, indicating their high bioavailability. Of all the elements analyzed, toxic metals Cd, Hg and As exhibited the highest potential ecological risk (RI). Site rank index (SRI), modified degree of contamination (mCd), and contamination severity index (CSI) based approaches identified stations ST5, ST9 and ST10 as the most contaminated sites of the study area.